|
| Tên thương hiệu: | KHJ |
| Số mẫu: | TS630C |
| Item | Typical Value | Test Method | ||
| Imperial | Metric | |||
| Backing | 3.0mil | 0.075mm | / | |
| Total Thickness | 5.4mil | 0.135±0.005mm | / | |
|
180°peel force (N/25mm) |
Before heating | 0.22~0.44lbs/in | 1-2N/25mm |
GBT 2792- 2014 |
| After heating | 0 | 0 | ||
Recommended heating release Temperature: 135-150℃*5-15min (depending on the thermal conductivity and heating uniformity of the object )
l Surface should be clean, dry, free of dust, oil or other contaminants.
l Proper pressure required by roller, hand or press when applying.
l Avoid repeat sticking to prevent adhesion decrease.
Notes
Please be advised that this technical data sheet is written based on our lab tests and experience only. Customer is responsible to determine the suitability of the product meets intended application requirements before approved for use.
